APPLICATION

To apply to car window:

Make sure surface is clean and dry, peel away the paper backing from the masking and the sticker. Making sure the sticker stays on to the sticky paper. Then press onto the surface that you want the sticker to adhere to. Then rub firmly, a credit card or some kind of squeegy works well. Slowly peel away the sticky masking leaving the image behind. It works best if you do this at an angle. When you are done with the sticker, simply peel off and windex the surface.

Same instructions apply if adhering to walls, tile, glass, wood, etc. If you are using a painted board as your surface make sure the paint is thouroughly dry or it will not stick! For removal you can heat the sticker with a blow dryer and it will come off much easier.

When applying large stickers to a wall, its really a two person job. Use masking tape to make level lines, trim the sticker along the bottom edge of lettering and line up to the masking tape level you have put on your wall.